ICY
ICY energy metering, connected to your reservations. Readings arrive on their own every two hours, the pitch powers up at check-in on the amperage you set for that accommodation, and it powers down at check-out, with an extra reading taken at each end so the invoice is anchored to the actual stay. Want to sell 16 amps instead of 10? Add it as a product and the device starts on the higher value by itself.
- Live
- Readings every 2 hours
- Amperage as an upsell
The readings that make an invoice defensible
- 2hAutomatic measurement interval
- +2Extra readings, at both ends
- AmpsSet per accommodation
- UpsellAs a product on the reservation
Credentials, then map the pitches
- 1
Enter your ICY API credentials
Paste the credentials from ICY into the settings screen. If they are right, your organisation and branch load automatically and you pick the ones you manage. We then ask ICY for every configured place on the account.
- 2
Connect pitches to devices
On the locations screen, pair each Camping.care pitch with its ICY measurement device from the dropdown. Added new hardware since? Save the credentials again on the General tab and the device list refreshes.
- 3
Set the power, and the upsell
Choose the default amperage the devices are enabled on, and if you sell a higher supply, attach the product that raises it. From then on check-in and check-out drive the hardware.
A live reading on the reservation itself
The widget on the booking
Open a reservation with an assigned, configured pitch and there is an ICY tab. Current live reading, a button to save it as an extra measurement, the amperage in use (changeable by hand) and whether the device is on, with a switch to turn it off.
The Energy app →Then bill it the normal way
The measurements land in the Energy app, so invoicing is the same one-click job as for a manually read meter: first and last reading of the stay, difference, your kWh price. ICY changes where the numbers come from, not how you charge for them.
What is supported, and what is not
ICY makes energy metering and thermostats. Only the energy measurement system is supported here. If you were hoping to drive ICY thermostats from a reservation, that is not part of this connection today.
You also need the hardware physically installed on your pitches and API credentials from ICY. This app is the link between their devices and your bookings; it is not a substitute for the metering install.
Frequently asked
How often are readings taken?
Every two hours while the system is enabled, plus an extra reading when the device is switched on at check-in and another when it is switched off at check-out.
Does the pitch power up automatically?
Yes, at check-in, on the amperage configured for that accommodation, or on the higher value if the guest has bought the upsell product.
I added new ICY devices and they are not in the list.
Save your credentials again on the General tab. That refreshes the device list from ICY.
Can I override the amperage for one guest?
Yes, from the ICY widget on the reservation, along with turning the device on or off by hand.
Are ICY thermostats supported?
Not at present. Only the energy measurement system is connected.
How do I invoice the usage?
Through the Energy app, exactly as you would for manual readings. The app finds the first and last reading in the stay and bills the difference.